It is currently 17 Dec 2017 17:17

All times are UTC + 1 hour




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: 25 Oct 2017 08:16 
Offline

Joined: 11 Jul 2012 11:45
Posts: 89
Hi everyone,
I use 320x240 glcd with touch screen panel. i use mikroelektronika touch system and these are my config ; TP_Init(320,240,0,1) TP_Set_ADC_Threshold(200)
this is my question; how can i define best value for TP_Set_ADC_Threshold? i want to so soft touch. what should be best value on TP_Set_ADC_Threshold(***) ?


Top
 Profile  
 
PostPosted: 26 Oct 2017 14:59 
Offline
mikroElektronika team
User avatar

Joined: 02 Feb 2017 14:21
Posts: 740
Hello,

If you want a fast response on the touchscreen you need to decrees the threshold value.
And if you want the touch screen to be less responsive you would need to increase the threshold value.

Try increasing or decreeing the value and see what setting fits your needs better.

*Note*
If you go over the limit of the threshold your press will not detect and if you go under the limit your touchscreen will detect a press even if you do not press it.

Best Regards,

_________________
Dusan Poluga.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: