I have a project that has many modules added. To avoid upsetting those files I have them in an "Include" folder only as .mcl files so that I can re-use them with a similar project but with a different program.
I am using the P18F45K22 with easyPic7 and Mikrobasic V 7.1.0 compiler
The compiler is fine with a release build and it sort of works but with a couple of anomalies.
I tried to use an ICD build to debug the problems but it will not build although the files are present. The error screen is attached as a pdf
ICD error.pdf [245.95 KiB]
Downloaded 9 times
The first few lines:
are not needed for the release build and it seems to compile with no error.
With or without those lines in, it will not build for the ICD version.
All files are in the sub folder of the program and project folder and the path appears to be correct in the Edit Paths menu.
Is it intentional that the debugger will not allow building with reference to .mcl files? The error messages say there is no .mbas file available for those .mcl files I have created.
If I change the files to the original .mbas modules it appears to build OK.