It is currently 18 Oct 2018 23:34

All times are UTC + 1 hour




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Rf examples
PostPosted: 17 Sep 2017 19:24 
Offline

Joined: 31 Aug 2017 16:44
Posts: 5
Hello,

Here is my question:
I have adapted a progaram from the example of hardwares libraries of Mikropascal Pro including transmitters and receivers
''Aurel'' and ''Micontroli''.
The initial program works perfectly in wireframe ''RC to RC0''.
On the other hand, in RF mode, the Lcd only displays ''???,,,,,,,????......, without exeption.

Transmittres and receivers run 100% from another progrm writter in ASM.

After comparing the 2 frames to the scope, i understood where the problem could come from.

Under Mikropascal,the1 bit ''manchester''frame measures more than 4 ms and the inter-frameabout 60 ms.

By other program in ASM, the bit measures 1 ms and the inter-frame 10ms, it works correctly.

The receiver ''aurel has an automatic gain adjustement which triggers in the absence of signal of more than 15 ms.It then sends parasitic signals which affect the frames.
I tried to change the delays: I have not got satisfactory improvement.
It seens to me that it could be necessary to use a transmission much superior to the 500 bauds of the routine ''man send''.But i have not found a way to change it.

I use Mikropascal, Mikro C easypic5, easypic6 and easypic7,device pic16f628, 16f887 16f877, 16f874.

Could you help me, please.

Thanks you.


Top
 Profile  
 
 Post subject: Re: Rf examples
PostPosted: 19 Sep 2017 16:44 
Offline
mikroElektronika team
User avatar

Joined: 15 Jan 2016 12:50
Posts: 1717
Hi,

Welcome to the MikroE forum.

Can you please describe which exactly hardware are you using?
Can you post the minimal project which represents the issue?

Kind regards,
Lana


Top
 Profile  
 
 Post subject: Re: Rf examples
PostPosted: 19 Sep 2017 16:57 
Offline

Joined: 31 Aug 2017 16:44
Posts: 5
Hello,
I use easypic5, 6,7 whith pic 16f887 and pic 16f628, mikropascal, device ''aurel'' tx433 and rr3.
Thanks.


Top
 Profile  
 
 Post subject: Re: Rf examples
PostPosted: 21 Sep 2017 12:18 
Offline

Joined: 31 Aug 2017 16:44
Posts: 5
I use the program Manchester codes library supplied in the mikropascal assistant.
She works in wired on RC0 and RC1 but not in RF.
I wish to modify Mam_Send_Init to accelerate the number of bauds per second.

thanks.


Top
 Profile  
 
 Post subject: Re: Rf examples
PostPosted: 21 Sep 2017 15:06 
Offline
mikroElektronika team
User avatar

Joined: 15 Jan 2016 12:50
Posts: 1717
Hi,

Unfortunately, we don't have that module,
so we cannot test it.

At this moment, baud rate is fixed on 500 bps.

Manchester Library is not open source,
and it is our company's policy not to share the source code.

But I will forward your suggestion for changeable baud rate
to our developers for consideration.

Thank you for understanding.

Kind regards,
Lana


Top
 Profile  
 
 Post subject: Re: Rf examples
PostPosted: 23 Sep 2017 10:49 
Offline

Joined: 31 Aug 2017 16:44
Posts: 5
Hello,
Thanks.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: